10 Ton Porta Power Kit Hydraulic Panel Beating Car Body Dent Frame Repair Tool

1 x Hydraulic Hand Pump / 1 x Hose / 1 x 10-ton Ram / 1 x Spreader Ram / 3 x Extension Tubes / 1 x Male connector
1 x Flat base / 1 x 90 Degree V Base / 1 x Wedge Head / 1 x Spreader Plunger Toe / 1 x Spreader Ram Toe
1 x Flex Head / 1 x Serrated Saddle / 1 x Carry case / 1 x User Manual

Item Specifications:

Color: red
Size:73cm*40cm*18cm
N.W.:29kg
G.W.:31kg
Load Capacity: 10 tons
Jack Power Type: Hydraulic
Max Lifting Height: 130 mm
Cylinder
Min Height:330 mm
Working Pressure: 62 Mpa
Oil Be Filled: 500 g

For Load:

Maximum load can not exceed the rated capacity.
The load can not exceed the half of the capacity when all tubes used.
The extension of the piston can not exceed the stroke.

For Safety:

Working oil:No 10
Check the level of oil,if it is not sufficient,please add the same hydraulic oil.
After using,close the valve with the cover,to keep the oil free from the dust and dirt.
Before lifting,adjust the jack slowly to make the load coaxial with resnect to jack.
Tube can not be bent,near to the catting tools and fires,also can not put te weight on it.

Note before operation:

Pls be sure to exhaust the gas inside first and check whether the two valve ports connected to the accessories are aligned or not.
Attached are video links for your reference.
https://www.youtube.com/watch?v=4RyxxIznnQk&list=UUBE6Abn0GSR1SNop_S8Ff0g
https://www.youtube.com/watch?v=u8fLbfaSwhk&list=UUBE6Abn0GSR1SNop_S8Ff0g&index=3
https://www.youtube.com/watch?v=w8b6f52KjWc&index=2&list=UUBE6Abn0GSR1SNop_S8Ff0g